Hotline
13605745458-
-
-
Technical requirements for machining parts
Contour processing of parts1. The unmarked shape tolerance should meet the requirements of GB1184-80.2. The allowable deviation of the unmarked length dimen ...
2021-03-26 04:22:57
-
-
-
-
Choose the right cleaning process
Let's talk about the choice of cleaning process. In the past, many companies used manual or simple mechanized cleaning, which was not only inefficient, ...
2021-03-26 04:22:30
-
-
-
-
Knowledge of high pressure reciprocating pump
Reciprocating pump is a kind of positive displacement pump. It relies on the reciprocating movement of the piston in the pump cylinder to change the volume ...
2021-03-26 04:21:57
-
-
-
-
High-pressure pump does not discharge water
If you find that the high-pressure pump does not produce water, it means that there is air in its water inlet pipe and pump body. It is usually because the ...
2021-03-26 04:21:13
-
-
-
-
Basic knowledge of automobile drive shaft
In the cars we usually drive, the use of car transmission shafts is very important, and the two shafts in different mechanisms are connected in the field of ...
2021-03-26 04:19:43
-
